Ford Fusion Spark Plug Socket Size
Overview
If you own a Ford Fusion and need to change the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can damage the spark plug or make it difficult to remove. In this article, we will provide you with the necessary information on the spark plug socket size for the Ford Fusion.
Determining the Spark Plug Socket Size
To determine the spark plug socket size for your Ford Fusion, you can refer to the owner’s manual or check the specifications provided by Ford. However, if you don’t have access to these resources, you can also measure the spark plug hex size using a caliper or ruler.
Measuring the Spark Plug Hex Size
To measure the spark plug hex size, follow these steps:
- Ensure the engine is cool before attempting to remove the spark plugs.
- Locate one of the spark plugs in your Ford Fusion.
- Carefully remove the spark plug wire or ignition coil that is connected to the spark plug.
- Use a caliper or ruler to measure the distance across the flats of the spark plug hex.
- Note down the measurement in millimeters or inches.
Ford Fusion Spark Plug Socket Size Chart
Based on the measurements, you can determine the appropriate spark plug socket size for your Ford Fusion. Here is a chart that provides the common spark plug socket sizes for different spark plug hex measurements:
| Spark Plug Hex Size (mm) | Spark Plug Socket Size (mm) | Spark Plug Socket Size (inch) |
|---|---|---|
| 14 mm | 16 mm | 5/8 inch |
| 16 mm | 18 mm | 11/16 inch |
| 18 mm | 20.8 mm | 13/16 inch |
Using the Correct Spark Plug Socket Size
Once you have determined the spark plug socket size for your Ford Fusion, you can proceed with changing the spark plugs. Here are the steps to follow:
- Make sure the engine is cool and the ignition is off.
- Locate the spark plug you want to replace.
- Insert the correctly sized spark plug socket onto the spark plug.
- Use a ratchet or spark plug socket wrench to loosen and remove the spark plug.
- Carefully install the new spark plug and tighten it to the recommended torque specification.
- Reconnect the spark plug wire or ignition coil.
- Repeat the process for each spark plug in your Ford Fusion.
Conclusion
Knowing the correct spark plug socket size for your Ford Fusion is essential for a successful spark plug replacement. By following the steps outlined in this article and referring to the spark plug socket size chart, you can confidently change the spark plugs in your Ford Fusion without any issues. Remember to always use the appropriate socket size to avoid damaging the spark plugs.