Skip to content
Home » Determining Socket Size for Craftsman Snowblower Spark Plug

Determining Socket Size for Craftsman Snowblower Spark Plug

    What Size Socket for Craftsman Snowblower Spark Plug

    Overview

    When it comes to maintaining your Craftsman snowblower, one important task is to regularly check and replace the spark plug. The spark plug plays a crucial role in igniting the fuel-air mixture in the engine, ensuring smooth operation and optimal performance. To remove and install a spark plug in your Craftsman snowblower, you’ll need the right socket size. In this article, we’ll guide you on determining the correct socket size for your Craftsman snowblower spark plug.

    Determining the Socket Size

    To determine the socket size for your Craftsman snowblower spark plug, you can refer to the owner’s manual or follow these simple steps:

    1. Locate the spark plug on your Craftsman snowblower. It is usually positioned on the engine cylinder head.
    2. Inspect the spark plug and look for any markings or numbers on the hexagonal part of the plug.
    3. Using a ruler or a caliper, measure the distance across the flats of the spark plug’s hexagonal part.
    4. Once you have the measurement, refer to the chart below to determine the corresponding socket size:
    Spark Plug Hex Size (inches) Socket Size (inches)
    13/16 13/16
    3/4 3/4
    5/8 5/8
    18mm 18mm

    Using the Correct Socket Size

    Once you have determined the socket size for your Craftsman snowblower spark plug, follow these steps to remove and install the spark plug:

    1. Ensure the snowblower is turned off and the spark plug wire is disconnected.
    2. Using the appropriate socket and a ratchet or spark plug wrench, carefully loosen the spark plug by turning it counterclockwise.
    3. Once the spark plug is loose, remove it by hand and inspect it for any signs of damage or wear.
    4. If necessary, clean the spark plug or replace it with a new one of the same specifications.
    5. When installing the spark plug, thread it in by hand to avoid cross-threading. Then, use the socket and wrench to tighten it clockwise until snug.
    6. Finally, reconnect the spark plug wire and ensure it is securely attached.

    Conclusion

    Knowing the correct socket size for your Craftsman snowblower spark plug is essential for proper maintenance and replacement. By following the steps outlined in this article and referring to the provided chart, you can easily determine the socket size and confidently perform spark plug maintenance on your Craftsman snowblower. Regularly inspecting and replacing the spark plug will help ensure reliable performance and extend the lifespan of your snowblower.