Acura TL Spark Plug Socket Size
Overview
If you own an Acura TL and are planning to change the spark plugs yourself, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage or improper installation of the spark plugs. In this article, we will provide you with the necessary information about the spark plug socket size for the Acura TL.
Spark Plug Socket Size Chart
To make it easier for you to find the right socket size, here is a chart that lists the spark plug socket size for different Acura TL models:
| Acura TL Model | Spark Plug Socket Size |
|---|---|
| Acura TL 3.2L (2004-2008) | 5/8″ (16mm) |
| Acura TL 3.5L (2007-2008) | 5/8″ (16mm) |
| Acura TL 3.7L (2009-2014) | 5/8″ (16mm) |
Steps to Change Spark Plugs in Acura TL
If you’re planning to change the spark plugs in your Acura TL, here are the steps you can follow:
- Make sure the engine is cool before starting.
- Locate the spark plug wires or ignition coils on top of the engine.
- Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight up.
- Using the appropriate spark plug socket and a ratchet or extension, loosen and remove the old spark plug by turning it counterclockwise.
- Inspect the old spark plug for any signs of wear or damage. If necessary, replace it with a new spark plug of the same size and type.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the spark plug socket and carefully thread it into the spark plug hole by hand. Make sure not to cross-thread it.
- Tighten the spark plug using the spark plug socket and ratchet or extension. Be careful not to overtighten.
- Reinstall the spark plug wire or ignition coil onto the spark plug.
- Repeat the above steps for each spark plug in your Acura TL.
Conclusion
Knowing the correct spark plug socket size for your Acura TL is essential when performing spark plug replacements. By following the steps outlined in this article, you can confidently change the spark plugs in your Acura TL and ensure proper installation. Remember to always consult your vehicle’s manual or a trusted source for specific instructions and safety precautions. Happy wrenching!