2017 Nissan Sentra Spark Plug Socket Size
If you are looking to change the spark plugs in your 2017 Nissan Sentra, it is important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the spark plug socket size for the 2017 Nissan Sentra.
Spark Plug Socket Size Chart
Engine | Socket Size |
---|---|
1.8L | 5/8″ (16mm) |
1.6L Turbo | 9/16″ (14mm) |
Now that you have the spark plug socket size chart for the 2017 Nissan Sentra, you can proceed with confidence to change the spark plugs. Here are the steps to follow:
Steps to Change Spark Plugs
- Make sure the engine is cool before starting.
- Locate the spark plugs. They are usually connected to thick wires and can be found on the top of the engine.
- Remove the spark plug wire by gently twisting and pulling it off the spark plug.
- Using the appropriate spark plug socket size from the chart, attach it to a ratchet or extension.
- Insert the socket onto the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand. Make sure not to cross-thread it.
- Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug. Be careful not to overtighten.
- Reattach the spark plug wire by pushing it onto the spark plug until it clicks into place.
- Repeat the process for the remaining spark plugs.
Following these steps and using the correct spark plug socket size will ensure a successful spark plug replacement in your 2017 Nissan Sentra. Remember to consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns.