Skip to content
Home » 2017 Honda Civic Spark Plug Socket Size Guide

2017 Honda Civic Spark Plug Socket Size Guide

    2017 Honda Civic Spark Plug Socket Size

    Overview

    The spark plugs in your 2017 Honda Civic play a crucial role in the ignition process of your engine. Over time, these spark plugs may need to be replaced to ensure optimal performance and fuel efficiency. One important aspect to consider when replacing spark plugs is the socket size required to remove and install them properly. In this article, we will explore the spark plug socket size for the 2017 Honda Civic.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size for your 2017 Honda Civic, refer to the following chart:

    Engine Type Socket Size
    1.5L Turbocharged 5/8 inch (16mm)
    2.0L 13/16 inch (21mm)

    Step-by-Step Guide

    If you need to replace the spark plugs in your 2017 Honda Civic, follow these steps:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coil packs, depending on your engine type.
    3. Using the appropriate socket size, carefully remove the spark plug wire or ignition coil pack from each spark plug.
    4. Once the wires or coil packs are removed, use the spark plug socket and a ratchet to loosen and remove the old spark plugs.
    5. Inspect the new spark plugs to ensure they are in good condition and properly gapped.
    6. Apply a small amount of anti-seize compound to the threads of the new spark plugs.
    7. Insert the new spark plugs into the spark plug socket and carefully thread them into the engine by hand.
    8. Tighten the spark plugs using the spark plug socket and ratchet, being careful not to overtighten.
    9. Reinstall the spark plug wires or ignition coil packs onto the new spark plugs.
    10. Repeat the process for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your 2017 Honda Civic is essential when it comes to maintaining and replacing your spark plugs. By following the steps outlined in this article and using the appropriate socket size, you can ensure that your spark plug replacement process goes smoothly and your engine continues to perform at its best.