Skip to content
Home » 2016 Toyota Corolla Spark Plug Socket Size Guide

2016 Toyota Corolla Spark Plug Socket Size Guide

    2016 Toyota Corolla Spark Plug Socket Size

    Overview

    If you own a 2016 Toyota Corolla and are planning to change the spark plugs yourself, it’s important to know the correct socket size to use. Using the wrong size socket can damage the spark plug and make the replacement process more difficult. In this article, we will provide you with the spark plug socket size for the 2016 Toyota Corolla.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, here is a chart that lists the socket size for the 2016 Toyota Corolla:

    Engine Type Socket Size
    1.8L 4-cylinder 5/8 inch (16mm)

    Steps to Change Spark Plugs

    If you’re planning to change the spark plugs in your 2016 Toyota Corolla, here are the steps you can follow:

    1. Make sure the engine is cool before you begin.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight out.
    4. Using the correct spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
    6. Inspect the old spark plug for any signs of wear or damage. If necessary, replace it with a new one of the same type and gap size.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. Reattach the spark plug wire or ignition coil to the spark plug.
    11. Repeat the above steps for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your 2016 Toyota Corolla is essential when performing a spark plug replacement. By following the steps outlined in this article, you can confidently change the spark plugs yourself and ensure the proper functioning of your vehicle’s engine. Remember to always use the recommended socket size and consult your vehicle’s manual for any specific instructions or precautions.