Skip to content
Home » 2015 Honda Accord Spark Plug Socket Size Guide

2015 Honda Accord Spark Plug Socket Size Guide

    2015 Honda Accord Spark Plug Socket Size

    Overview

    The spark plugs in your 2015 Honda Accord play a crucial role in the ignition process of your engine. Over time, these spark plugs may wear out and need to be replaced. To ensure a smooth and efficient replacement process, it is important to know the correct spark plug socket size for your Honda Accord. In this article, we will provide you with the necessary information to determine the spark plug socket size for your 2015 Honda Accord.

    Determining the Spark Plug Socket Size

    To determine the spark plug socket size for your 2015 Honda Accord, you can refer to the owner’s manual or consult a reliable automotive resource. However, we have compiled a chart below to make it easier for you to find the correct socket size:

    Engine Type Spark Plug Socket Size
    2.4L 4-cylinder 5/8 inch (16mm)
    3.5L V6 9/16 inch (14mm)

    Steps for Spark Plug Replacement

    If you need to replace the spark plugs in your 2015 Honda Accord, follow these steps:

    1. Ensure the engine is cool before starting the replacement process.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight out.
    4. Using the appropriate spark plug socket size determined from the chart above, attach the socket to a ratchet or extension.
    5. Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
    6. Once the spark plug is loose, continue turning it by hand until it can be removed from the engine.
    7. Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new spark plug of the same size and specifications.
    8. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    9. Insert the new spark plug into the spark plug well and hand-tighten it clockwise until it is snug.
    10. Using the spark plug socket and ratchet or extension, tighten the spark plug an additional 1/16 to 1/8 of a turn.
    11. Repeat the above steps for each spark plug, ensuring that you follow the correct socket size for each engine type.
    12. Once all the spark plugs are replaced, reattach the spark plug wires or ignition coils to their respective spark plugs.

    Conclusion

    Knowing the correct spark plug socket size for your 2015 Honda Accord is essential for a successful spark plug replacement. By referring to the chart provided and following the steps outlined, you can confidently replace the spark plugs in your Accord and maintain its optimal performance. Remember to always consult your owner’s manual or a trusted automotive resource for specific instructions and guidelines for your vehicle.