Skip to content
Home » 2014 Mazda 6 Spark Plug Socket Size Guide

2014 Mazda 6 Spark Plug Socket Size Guide

    2014 Mazda 6 Spark Plug Socket Size

    If you are looking to change the spark plugs on your 2014 Mazda 6, it is important to know the correct socket size to use. Using the wrong socket size can lead to damage to the spark plugs or the socket itself. In this article, we will provide you with the spark plug socket size for the 2014 Mazda 6.

    Spark Plug Socket Size Chart

    Engine Type Socket Size
    2.5L SkyActiv-G 16mm
    2.2L SkyActiv-D 16mm

    As shown in the chart above, both the 2.5L SkyActiv-G and the 2.2L SkyActiv-D engines in the 2014 Mazda 6 require a 16mm spark plug socket.

    Steps to Change Spark Plugs in a 2014 Mazda 6

    1. Ensure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil by gently pulling it straight up.
    4. Use the 16mm spark plug socket to loosen and remove the old spark plug.
    5. Inspect the spark plug for any signs of damage or wear. Replace if necessary.
    6. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    7. Hand-tighten the new spark plug into the cylinder head, then use the spark plug socket to tighten it to the specified torque.
    8. Reinstall the spark plug wire or ignition coil.
    9. Repeat the above steps for each spark plug.

    Following these steps will ensure a proper spark plug replacement in your 2014 Mazda 6. Remember to always consult your vehicle’s owner’s manual for specific instructions and torque specifications.

    Changing the spark plugs in your 2014 Mazda 6 is an important maintenance task that can help improve engine performance and fuel efficiency. By using the correct spark plug socket size and following the proper steps, you can successfully replace the spark plugs in your Mazda 6 and keep it running smoothly.