2014 Honda Accord Sport Spark Plug Socket Size
If you own a 2014 Honda Accord Sport and are looking to change the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can damage the spark plugs or make it difficult to remove them. In this article, we will provide you with the spark plug socket size for the 2014 Honda Accord Sport.
Spark Plug Socket Size Chart
Engine Type | Socket Size |
---|---|
2.4L Inline-4 | 5/8 inch (16mm) |
3.5L V6 | 9/16 inch (14mm) |
Now that you have the spark plug socket size chart, let’s go through the steps to change the spark plugs in your 2014 Honda Accord Sport.
Steps to Change Spark Plugs
- Make sure the engine is cool before you begin.
- Locate the spark plug wires or ignition coil packs on top of the engine.
- Remove the spark plug wire or ignition coil pack from the first spark plug by gently pulling it straight up.
- Use the appropriate spark plug socket size from the chart to loosen and remove the spark plug. Turn it counterclockwise to unscrew it from the engine.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new spark plug of the same type and gap.
- Apply a small amount of anti-seize compound to the threads of the new spark plug to prevent it from seizing in the engine.
- Insert the new spark plug into the spark plug socket and carefully thread it into the engine by hand. Make sure it is properly seated and then use the socket and a ratchet to tighten it. Be careful not to overtighten.
- Reinstall the spark plug wire or ignition coil pack onto the spark plug.
- Repeat the above steps for each spark plug, one at a time, until all of them have been replaced.
- Once all the spark plugs have been replaced, start the engine and listen for any abnormal noises or misfires. If everything sounds and feels normal, you have successfully changed the spark plugs in your 2014 Honda Accord Sport.
Changing the spark plugs in your 2014 Honda Accord Sport is a relatively simple task that can help improve engine performance and fuel efficiency. By using the correct spark plug socket size and following the steps outlined in this article, you can ensure a smooth and successful spark plug replacement process.