Skip to content
Home » 2014 Corolla Spark Plug Socket Size Guide

2014 Corolla Spark Plug Socket Size Guide

    2014 Corolla Spark Plug Socket Size

    Overview

    If you own a 2014 Toyota Corolla and need to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plugs or the socket itself. In this article, we will provide you with the spark plug socket size for the 2014 Corolla.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, here is a handy chart:

    Engine Type Socket Size
    1.8L 4-Cylinder 5/8 inch (16mm)
    2.4L 4-Cylinder 5/8 inch (16mm)

    Steps to Replace Spark Plugs

    If you’re planning to replace the spark plugs in your 2014 Corolla, here are the steps you can follow:

    1. Make sure the engine is cool before starting.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the wire or coil from the first spark plug by gently pulling it straight up.
    4. Using the appropriate spark plug socket and a ratchet or extension, loosen and remove the old spark plug by turning it counterclockwise.
    5. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
    6. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    7. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand. Make sure it is properly seated.
    8. Tighten the spark plug using the socket and ratchet, turning it clockwise. Be careful not to overtighten.
    9. Reinstall the spark plug wire or ignition coil onto the spark plug.
    10. Repeat the process for the remaining spark plugs.

    Conclusion

    Knowing the correct spark plug socket size for your 2014 Corolla is essential when it comes to replacing the spark plugs. By following the steps outlined in this article, you can easily replace the spark plugs and ensure the optimal performance of your vehicle. Remember to always refer to your vehicle’s manual for specific instructions and consult a professional if you are unsure or uncomfortable performing the task yourself.