2012 G37 Spark Plugs Socket Size
Overview
If you own a 2012 Infiniti G37 and are looking to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plugs or the engine. In this article, we will provide you with the necessary information on the socket size required for the spark plugs in a 2012 G37.
Spark Plug Socket Size Chart
To make it easier for you to find the correct socket size, here is a handy chart:
| Spark Plug Brand | Socket Size |
|---|---|
| NGK | 5/8 inch (16mm) |
| Denso | 5/8 inch (16mm) |
| Autolite | 5/8 inch (16mm) |
| Champion | 13/16 inch (21mm) |
Steps to Replace Spark Plugs
If you’re planning to replace the spark plugs in your 2012 G37, here are the steps you can follow:
- Make sure the engine is cool before starting.
- Locate the spark plugs. In the 2012 G37, they are located on top of the engine, underneath the engine cover.
- Remove the engine cover by unscrewing the bolts or clips holding it in place.
- Using the correct socket size from the chart above, attach it to a ratchet or extension.
- Insert the socket onto the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
- Inspect the old spark plug for any signs of damage or wear. If necessary, consult your vehicle’s manual or a mechanic for further guidance.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand. Make sure not to cross-thread it.
- Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
- Replace the engine cover and secure it with the bolts or clips.
- Repeat the above steps for each spark plug.
Conclusion
Knowing the correct socket size for the spark plugs in your 2012 G37 is essential for a successful replacement. By following the steps outlined in this article and using the appropriate socket size, you can ensure that your spark plug replacement is done correctly and without any issues. Remember to always consult your vehicle’s manual or seek professional help if you have any doubts or concerns. Happy wrenching!