2007 Ford Explorer Spark Plug Socket Size
Overview
If you own a 2007 Ford Explorer and need to replace the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size refers to the size of the socket that fits over the spark plug, allowing you to remove and install it properly. Using the wrong socket size can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the correct spark plug socket size for a 2007 Ford Explorer.
Spark Plug Socket Size Chart
To make it easier for you to find the right spark plug socket size, here is a chart that lists the socket size for the 2007 Ford Explorer:
| Engine Type | Socket Size |
|---|---|
| 4.0L V6 | 5/8 inch (16mm) |
| 4.6L V8 | 9/16 inch (14mm) |
Steps to Replace Spark Plugs
If you’re planning to replace the spark plugs in your 2007 Ford Explorer, here are the steps you can follow:
- Make sure the engine is cool before starting.
- Locate the spark plugs. In the 4.0L V6 engine, they are located on the sides of the engine. In the 4.6L V8 engine, they are located on the top of the engine.
- Remove the spark plug wire by firmly pulling it straight off the spark plug. Be careful not to pull on the wire itself.
- Attach the spark plug socket to a ratchet or extension.
- Insert the spark plug socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new spark plug of the same size and type.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the spark plug socket and carefully thread it into the spark plug hole by hand.
- Tighten the spark plug using the spark plug socket and ratchet. Be careful not to overtighten.
- Reattach the spark plug wire by pushing it firmly onto the spark plug until you hear a click.
- Repeat the above steps for each spark plug.
Conclusion
Knowing the correct spark plug socket size is essential when replacing the spark plugs in your 2007 Ford Explorer. By following the steps outlined in this article and using the appropriate socket size, you can ensure a successful spark plug replacement. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or questions.