2002 Honda Accord Spark Plug Socket Size (mm)
If you’re looking to change the spark plugs on your 2002 Honda Accord, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plug or the socket itself. In this article, we’ll provide you with the spark plug socket size in millimeters for the 2002 Honda Accord.
Spark Plug Socket Size Chart
| Engine Type | Socket Size (mm) |
|---|---|
| 2.3L 4-cylinder | 16mm |
| 3.0L V6 | 16mm |
As shown in the chart above, both the 2.3L 4-cylinder and the 3.0L V6 engines in the 2002 Honda Accord require a 16mm spark plug socket.
Steps to Change Spark Plugs on a 2002 Honda Accord
- Make sure the engine is cool before attempting to change the spark plugs.
- Locate the spark plug wires or ignition coils on top of the engine.
- Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight up.
- Using the 16mm spark plug socket and a ratchet or spark plug wrench, loosen and remove the old spark plug by turning it counterclockwise.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new spark plug of the same size and heat range.
- Apply a small amount of anti-seize compound to the threads of the new spark plug to prevent it from seizing in the cylinder head.
- Insert the new spark plug into the spark plug socket and carefully thread it into the cylinder head by hand. Make sure not to cross-thread it.
- Tighten the spark plug using the spark plug socket and ratchet or spark plug wrench. Be careful not to overtighten, as this can damage the spark plug or cylinder head.
- Reinstall the spark plug wire or ignition coil onto the spark plug until it clicks into place.
- Repeat steps 3-9 for each remaining spark plug.
By following these steps and using the correct 16mm spark plug socket, you can successfully change the spark plugs on your 2002 Honda Accord. Regularly replacing spark plugs can help maintain engine performance and fuel efficiency.