1998 Mitsubishi Eclipse Spark Plug Socket Size
Overview
If you own a 1998 Mitsubishi Eclipse and are looking to change the spark plugs, it’s important to know the correct socket size to use. The spark plug socket size determines the tool you need to remove and install the spark plugs effectively. In this article, we will provide you with the spark plug socket size for a 1998 Mitsubishi Eclipse.
Spark Plug Socket Size Chart
To make it easier for you to find the right spark plug socket size, here is a handy chart:
| Engine Type | Socket Size |
|---|---|
| 2.0L 4-cylinder | 5/8 inch (16mm) |
| 2.4L 4-cylinder | 5/8 inch (16mm) |
Steps to Change Spark Plugs
If you’re planning to change the spark plugs in your 1998 Mitsubishi Eclipse, here are the steps to follow:
- Make sure the engine is cool before starting any work.
- Locate the spark plugs. They are typically located on the top of the engine, connected to the ignition coils.
- Remove the spark plug wires or ignition coil connectors from each spark plug. Be careful not to damage the wires or connectors.
- Using the appropriate spark plug socket size (as mentioned in the chart above), attach it to a ratchet or extension.
- Insert the spark plug socket into the spark plug well and carefully loosen the spark plug by turning it counterclockwise.
- Once the spark plug is loose, remove it from the well using the socket and ratchet.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
- Apply a small amount of anti-seize compound to the threads of the new spark plug to prevent it from seizing in the future.
- Insert the new spark plug into the spark plug well and hand-tighten it clockwise until snug.
- Use the spark plug socket and ratchet to tighten the spark plug an additional 1/2 to 2/3 of a turn.
- Reconnect the spark plug wires or ignition coil connectors to each spark plug.
- Repeat the above steps for each spark plug.
Conclusion
Knowing the correct spark plug socket size for your 1998 Mitsubishi Eclipse is essential for a successful spark plug replacement. By following the steps outlined in this article, you can confidently change the spark plugs in your Eclipse and ensure optimal engine performance. Remember to always consult your vehicle’s manual or a trusted mechanic if you have any doubts or concerns. Happy wrenching!