1998 Honda Accord Spark Plug Socket Size
Overview
If you own a 1998 Honda Accord and need to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can damage the spark plug and make the replacement process more difficult. In this article, we will provide you with the spark plug socket size for a 1998 Honda Accord.
Spark Plug Socket Size Chart
To make it easier for you to find the correct spark plug socket size, here is a chart that lists the socket size for various Honda Accord models, including the 1998 model:
| Honda Accord Model | Spark Plug Socket Size |
|---|---|
| 1998 Honda Accord | 5/8 inch (16mm) |
Steps to Replace Spark Plugs
If you’re planning to replace the spark plugs in your 1998 Honda Accord, here are the steps you can follow:
- Make sure the engine is cool before starting any work.
- Locate the spark plug wires. They are usually connected to the top of the engine and run to each spark plug.
- Remove the spark plug wire from the first spark plug by firmly grasping the boot and pulling it straight off.
- Using the appropriate spark plug socket size (5/8 inch or 16mm), attach it to a ratchet or extension.
- Place the socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
- Inspect the old spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same type and gap.
- Apply a small amount of anti-seize compound to the threads of the new spark plug.
- Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
- Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
- Reattach the spark plug wire to the spark plug by pushing it firmly onto the boot until it clicks into place.
- Repeat these steps for each spark plug, one at a time.
Conclusion
Knowing the correct spark plug socket size for your 1998 Honda Accord is essential when replacing the spark plugs. By following the steps outlined in this article, you can confidently replace the spark plugs and ensure the optimal performance of your vehicle. Remember to always use the appropriate socket size and take necessary precautions to avoid any damage during the replacement process.