Skip to content
Home » 1997 Honda CR-V Spark Plug Socket Size

1997 Honda CR-V Spark Plug Socket Size

    1997 Honda CR-V Socket Size for Spark Plug

    Overview

    If you own a 1997 Honda CR-V and need to replace the spark plugs, it’s important to know the correct socket size to use. The socket size refers to the diameter of the opening that fits over the spark plug, allowing you to remove or install it properly. Using the wrong socket size can damage the spark plug or make it difficult to remove. In this article, we will provide you with the socket size information you need for your 1997 Honda CR-V.

    Socket Size Chart

    To make it easier for you to find the correct socket size for your 1997 Honda CR-V spark plugs, we have compiled a socket size chart below:

    Spark Plug Brand Socket Size
    NGK 5/8 inch (16mm)
    Denso 5/8 inch (16mm)
    Bosch 13/16 inch (21mm)

    Steps to Replace Spark Plugs

    If you’re planning to replace the spark plugs in your 1997 Honda CR-V, here are the steps you can follow:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plug wires or ignition coils on top of the engine.
    3. Remove the spark plug wire or ignition coil from the first spark plug by gently pulling it straight off.
    4. Using the appropriate socket size from the chart above, attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the spark plug.
    6. Inspect the old spark plug for signs of wear or damage. If necessary, replace it with a new one of the same brand and model.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. Reattach the spark plug wire or ignition coil to the spark plug.
    11. Repeat the above steps for each spark plug, one at a time.

    Conclusion

    Knowing the correct socket size for your 1997 Honda CR-V spark plugs is essential for a successful replacement. By referring to the socket size chart provided and following the steps outlined, you can confidently replace the spark plugs in your vehicle. Regularly replacing spark plugs can help maintain engine performance and fuel efficiency, so it’s a good practice to do so at the recommended intervals.