Skip to content
Home » 1997 Ford Expedition Spark Plug Socket Size Guide

1997 Ford Expedition Spark Plug Socket Size Guide

    1997 Ford Expedition Spark Plug Socket Size

    Overview

    If you own a 1997 Ford Expedition and need to replace the spark plugs, it’s important to know the correct socket size to use. Using the wrong size socket can lead to damage to the spark plug or the socket itself. In this article, we will provide you with the spark plug socket size for a 1997 Ford Expedition.

    Spark Plug Socket Size Chart

    To make it easier for you to find the correct spark plug socket size, here is a handy chart:

    Engine Type Socket Size
    4.6L V8 5/8 inch (16mm)
    5.4L V8 9/16 inch (14mm)

    Steps to Replace Spark Plugs

    If you’re planning to replace the spark plugs in your 1997 Ford Expedition, here are the steps you can follow:

    1. Make sure the engine is cool before starting any work.
    2. Locate the spark plugs. In the 4.6L V8 engine, they are located on the top of the engine, while in the 5.4L V8 engine, they are located on the sides.
    3. Remove the spark plug wire by firmly pulling it straight off the spark plug. Be careful not to pull on the wire itself.
    4. Using the appropriate spark plug socket size, attach it to a ratchet or extension.
    5. Place the socket over the spark plug and turn it counterclockwise to loosen and remove the old spark plug.
    6. Inspect the spark plug for any signs of damage or wear. If necessary, replace it with a new one of the same size and type.
    7. Apply a small amount of anti-seize compound to the threads of the new spark plug.
    8. Insert the new spark plug into the socket and carefully thread it into the spark plug hole by hand to avoid cross-threading.
    9. Tighten the spark plug using the socket and ratchet, turning it clockwise until it is snug.
    10. Reattach the spark plug wire by pushing it firmly onto the spark plug until it clicks into place.
    11. Repeat the above steps for each spark plug.

    Conclusion

    Knowing the correct spark plug socket size for your 1997 Ford Expedition is essential when it comes to replacing the spark plugs. By following the steps outlined in this article, you can safely and effectively replace the spark plugs in your vehicle, ensuring optimal performance and longevity.